ProTacOne provides certified fire watch services in Tacoma and Pierce County, WA. Fire watch is required under NFPA 25 when a fire suppression system is impaired for more than 4 hours, during hot work operations, or when ordered by the fire marshal. ProTacOne deploys certified fire watch officers 24/7 with short-notice availability. Phone: 1.888.776.8221. Address: 401 Broadway, Suite 100, Tacoma, WA 98402.

Fire Watch Services

CERTIFIED FIRE WATCH IN TACOMA & PIERCE COUNTY

When your fire suppression system goes offline — planned or unplanned — you are legally required to deploy fire watch. ProTacOne provides certified fire watch officers available 24/7, on short notice, throughout Tacoma and Pierce County.

Available 24/7 · Short-Notice Deployment

What Is Fire Watch?

CONTINUOUS MONITORING WHEN YOUR SYSTEM IS DOWN

Fire watch is the deployment of trained personnel to continuously monitor a building or site when its fire suppression or detection system is offline, impaired, or under repair. It is not optional — it is a legal requirement under the International Fire Code (IFC), NFPA 25, and Washington State fire codes.

Under NFPA 25, fire watch is required any time a fire suppression system is impaired for more than 4 hours in a 24-hour period. The fire marshal may also order fire watch during construction, renovation, hot work operations, or any time a fire risk is elevated.

  • Required by International Fire Code and NFPA 25
  • Triggered when sprinkler or alarm systems are offline 4+ hours
  • Required during hot work, cutting, welding, and open-flame operations
  • May be ordered by the fire marshal at any time
  • Failure to maintain fire watch can result in fines and liability

Who Needs Fire Watch?

COMMON FIRE WATCH SCENARIOS

Sprinkler System Maintenance or Repair

Any time your sprinkler system is taken offline for maintenance, repair, or inspection — even briefly — fire watch may be required. Building owners and managers are responsible for ensuring coverage is in place.

Construction & Renovation

Active construction sites, especially during phases involving hot work (welding, cutting, grinding), require fire watch. General contractors and project owners are responsible for maintaining coverage.

Fire Alarm System Outage

When a fire alarm system is offline for testing, repair, or power failure, fire watch provides the human monitoring layer that the system normally provides automatically.

Fire Marshal Order

The local fire marshal may order fire watch at any time based on an inspection finding or elevated risk condition. ProTacOne can deploy on short notice to satisfy the order.

Special Events in Impaired Buildings

Events held in buildings with impaired fire systems require fire watch for the duration of the event. ProTacOne coordinates with event organizers and venue managers to ensure coverage.

How It Works

FROM CALL TO DEPLOYMENT

01

Contact ProTacOne

Call 1.888.776.8221 or submit a request online. Tell us your location, the reason for fire watch, and how quickly you need coverage. We can deploy within hours for urgent situations.

02

Site Briefing

Our officer is briefed on your building layout, the impaired system, evacuation routes, and the fire department contact. We review any specific requirements from your fire marshal.

03

Continuous Monitoring

The officer conducts continuous patrols of the affected area, documents conditions at required intervals, and maintains communication with our 24/7 dispatch center throughout the shift.

04

Incident Response

If a fire condition develops, the officer immediately notifies the fire department, initiates evacuation procedures, and contacts our dispatch center. Every action is documented in the watch log.

05

Watch Logs Delivered

Detailed watch logs documenting patrol times, conditions observed, and any incidents are delivered to the building owner or manager after every shift. Logs satisfy fire marshal documentation requirements.

What to Expect

CODE-COMPLIANT COVERAGE, DOCUMENTED

Certified Officers

All ProTacOne fire watch officers are trained in fire watch protocols, evacuation procedures, and fire department notification requirements.

Detailed Watch Logs

Logs document patrol times, areas covered, conditions observed, and any incidents — formatted to satisfy fire marshal requirements.

Short-Notice Deployment

We understand that fire watch needs are often unplanned. Our 24/7 dispatch center can mobilize officers within hours of a request.

Direct Communication

You have direct access to your assigned officer and our dispatch center throughout the coverage period — not a call center.

Service Area

PIERCE COUNTY & KING COUNTY, WA

ProTacOne provides fire watch services throughout Tacoma, Lakewood, Puyallup, Federal Way, Auburn, Seattle, Bellevue, Renton, Kent, and surrounding communities in Pierce and King County, Washington.

TacomaLakewoodPuyallupFederal WayAuburnSeattleBellevueRentonKentBurienSeaTacTukwila

FIRE WATCH FAQ

When is fire watch legally required in Washington State?

Fire watch is required under NFPA 25 any time a fire suppression system is impaired for more than 4 hours in a 24-hour period. It is also required during hot work operations (welding, cutting, grinding), during certain construction phases, and whenever ordered by the local fire marshal. Washington State adopts the International Fire Code, which incorporates these requirements.

How quickly can ProTacOne deploy fire watch officers?

ProTacOne can typically deploy fire watch officers within hours of a confirmed request. Our 24/7 dispatch center maintains a roster of available, trained officers for urgent deployments. Call 1.888.776.8221 for immediate assistance.

What documentation does ProTacOne provide for fire watch?

ProTacOne provides detailed watch logs after every shift documenting patrol times, areas covered, conditions observed, and any incidents. These logs are formatted to satisfy fire marshal documentation requirements and are delivered directly to the building owner or manager.

Does ProTacOne provide fire watch for construction sites?

Yes. ProTacOne provides fire watch for active construction sites throughout Pierce and King County, WA — particularly during hot work phases involving welding, cutting, or grinding. We work directly with the general contractor and site superintendent.

What happens if a fire is detected during fire watch?

If a fire condition develops, the ProTacOne fire watch officer immediately notifies the fire department (911), initiates evacuation procedures per the building's emergency plan, and contacts our 24/7 dispatch center. Every action is documented in the watch log.

How much does fire watch cost in Tacoma?

Fire watch pricing depends on the size of the property, the number of officers required, and the duration of coverage. Contact ProTacOne at 1.888.776.8221 or submit a request online for a same-day quote.

NEED FIRE WATCH COVERAGE?

Call us now or submit a request — we can deploy within hours for urgent situations.